Use your smartphone to control your motorhome or caravan by means of a simple app.
The ideal interface for using your smartphone to control your motorhome or caravan by means of a simple app. Teleco Hub operates via Bluetooth when nearby and via SMS from a distance. Operation via Bluetooth is completely free of charge, whereas controlling via SMS requires the installation in the Teleco HUB box of a Micro SIM CARD (either contract or PAYG).
Inputs: 2 digital channels (internal voltage 6 Volts)
Dimensions: 147x97x35 mm
This interface is also compatible with CI-BUS systems
It is used to connect the satellite antenna to the Teleco HUB control centre. Thanks to this solution, all Teleco DVBS2 satellite antennas are compatible with Teleco HUB, even those already installed in vehicles!
75 x 47 x 24 mm
Weight: 40 g
AIR CONDITIONER interface
Used to connect the Telair air conditioner to the Teleco HUB control centre. Thanks to this solution, all Telair Silent and DualCliama air conditioners are compatible with the Teleco HUB, even those already installed in vehicles!
69 x 42 x 22 mm
Weight: 40 g
What will you be able to do?
Turn the Telair air conditioner on or off, both for cooling and heating, so that the vehicle is at a comfortable temperature when you return to it.
Turn the TIG generator on or off so that you always have 230 Volt electricity available, or to recharge the battery.
Close the Flat Sat antenna remotely or activate the antenna to align it with a satellite (Bluetooth only).
Turn lights on or off. Check the temperature inside the vehicle, the battery level and the drinking and waste water levels, or whether the door or the rooflight is open or closed.
Alarm system with receipt of an SMS message in the event that someone starts up your vehicle. Activation on your smartphone of a system to track your vehicle on Google Maps. Note: In order to track your vehicle the SIM card installed in the Teleco HUB control centre must allow internet navigation.